Map Coasters Update

Map Coasters by Natalie Parker

It’s been over three years since I posted my map coaster tutorial.  It is one of my most popular craft projects of all time here on the blog!  How are they holding up?

Yep, we are still using them.  Every day.  They get a lot of use and get tossed around every which way!  I wasn’t sure how long they would last but they are still going strong and I have no plans to replace them.

Click here to visit my map coaster tutorial

I heard they now make dishwasher safe Mod Podge?  What is this madness? I haven’t tried it yet but it may negate the spray enamel step in the tutorial.  Let me know if you’ve tried it!

Map Coasters by Natalie Parker


Book Coasters – Harry Potter Style

Harry Potter CoastersAnother project to use up the leftovers from my book project/wall art!

Note – I am not going into detail about all the steps here.  For full detailed instructions on making coasters, including troubleshooting info, visit my map coaster tutorial.

I know the best way to make coasters and I had all sorts of book pieces lying around.  First up – some Harry Potter coasters for my sister-in-law.  I love Harry Potter, but they really love Harry Potter over at their house.  My niece got a Harry Potter-themed room when she was born!

The steps here are exactly the same as I followed when I made the map coasters.  I took the leftover Harry Potter pages and picked eight favorites.  I still have a bunch of coasters that I got at the dollar bin at Michaels.

Harry Potter Book CoastersI cut out circles and Mod Podged them to the coasters.  I used a couple layers of Hard Coat Mod Podge to seal them.  Guess what I discovered?  When you seal book pages with Mod Podge there are no streaks!  These turned out prettier than my map coasters!

Harry Potter Book CoastersI sprayed them with my clear spray paint to seal and totally waterproof them.  After they dried, I added a pretty ribbon and wrapped them up.  Then I wondered if I needed more coasters at home because these were seriously cool.

Harry Potter Book CoastersSeriously, how many coasters do you pick up and get read about when Harry Potter first learned to fly a broom?

Harry Potter Book Coasters

Map Coasters and Memories

Picture this: new home, new coffee table. What’s missing? New coasters.

Yes, coasters, very important.

I saw lots of fun coaster tutorials online, but was really struck by these map coasters I saw from the San Francisco Chronicle.

Being me, I couldn’t just use any old map. No, I live for making things more difficult. I decided to use special maps, i.e. maps I had saved from past travels. They were in the closet anyway and free.

It ended up being pretty fun. The husband and I picked out our favorites together which included something from our first trip together, our honeymoon, and several other happy vacations.


You will need:

  • Coasters to be covered. Anything coaster-shaped would also work well.
  • Maps
  • Mod Podge
  • Foam brush
  • Scissors
  • Spray enamel

These can be made in any shape using any coasters you can find. I found these monogram coasters in the dollar bin at Michael’s and bought a bunch.

Map Coasters 3

Assembly Line

Start by tracing the coaster shape onto your maps and cutting them out.

Take a moment to lay the piece on top of the coaster and trim off bits of excess as necessary.

Map Coasters 4

Using Mod Podge, glue the shapes to the coasters. I used Hard Coat Mod Podge because I wanted the coasters to be durable.

Important note: spread the Mod Podge on the coaster, then press the shape down. If you put the Mod Podge on the shape first, there is a greater chance of bubbles forming and paper curling.

Map Coasters 5

Using this method, you have a lot more control placing the shape on the coaster.

Map Coasters 6

Leave the coasters to dry for at least an hour. Then apply a thin coat of Mod Podge to the top of each coaster. Let that dry for 20 minutes, then add a second coat.

Let these sit for a couple of hours or overnight.

Map Coasters 7

Bringing in Reinforcements

I checked with Amy at Mod Podge Rocks to see if two coats of Mod Podge would make the coasters durable enough. She suggested adding a layer of spray enamel to ensure absolute waterproofing.

Spray enamel is like clear spray paint and can be found pretty cheap at the hardware store.

Spray your coasters using the same sensibility you would to spray paint something: stay at least a foot away and use an even hand or else the spray will puddle up on the coaster.

They’ll dry to the touch in an hour and you can pick them up and bring them inside.  Let these dry for a day inside (to be on the safe side).

Map Coasters 8

Durability Testing

I had to be sure with this. I set an icy drink on one of the coasters for several hours. Victory! They are indeed waterproof.

Map Coasters 13


Bowing – If the coasters are thin, they may bow after you glue the shapes to them. Set the coasters under a pile of heavy books for a couple of days and they will return to flatness.

Bubbles – Even when I had smoothed the shape out while gluing, sometimes I would return to find a bubble or two after they had dried. Don’t sweat it. The bubbles mysteriously went away after I added the top coats of Mod Podge.

Trimming – If the shape hangs slightly over the edge of the coaster, trim it before gluing. I’ve not had success trying to press or glue down any overhanging paper onto the sides of the coaster.

When in doubt, leave it alone and don’t touch it. Instead of trying to fix the bubbles, I left them alone and went on with the project. They disappeared and I’m glad I didn’t try something drastic. I sprayed one of the coasters with too much enamel and it looked cloudy when wet. I tried, unsuccessfully, to wipe some of the wet enamel off. Bad decision. It ended up looking okay, but really, leave it alone and it will probably turn out okay!

Tips & Ideas

  • Use any map you have lying around.
  • You don’t have to over complicate it like I did by using special maps.
  • Coasters can be found pretty cheaply – look for cheap seasonal coasters at the store.
  • Glue the shapes to the coasters by spreading Mod Podge on the coaster and then placing the shape (not the other way around).
  • Make sure to use spray enamel (like clear spray paint) to water proof the coasters.